1/4" Shina Plywood
All five plies or layers of 1/4" Shina Plywood are Shina, a wood that is very easy to carve in any direction, including across the grain.
A very thin application of glue is used between the five plies, so compared to most plywoods, these blocks will feel more like solid wood as you carve them. Because the glue is thin, your tools will stay sharp longer too.
Because it is only 1/4" thick, we do not recommend carving on both sides of these blocks. 3/8" Shina Plywood (previously called "All Shina") is thick enough to safely carve on both sides.
Comparing 3/8" and 1/4"
- 3/8" is less apt to warp because it is thicker
- 3/8" can be carved on both sides
- If the block will be carved on only one side, 1/4" is more economical
- 1/4" is easier to print on an etching press because it is thinner
If you have not tried carving Shina before and you live in the U.S., we will be happy to send you one small sample for free. Please call 800-832-4264 or email your name and address to email@example.com.
If you live outside the U.S., you will need to pay the shipping, which starts at around U.S.$10.00. Please contact us for the exact amount to ship samples to your country.
We gather requests for samples together and send them out every seven to ten days, when we have a break from shipping orders. Thank you for your patience.
Receive a 5% discount on orders of 12 or more of the same size and same kind of Shina standard size blocks (see list below). This discount is given automatically when you place your order.
There are no discounts on custom orders.
Sizes and Shipping
To maximize the number of blocks from a sheet, reduce waste and keep prices as low as possible, we may lose up to the width of the saw blade (about 1/8") from the dimensions of a block. Exact and custom sizes can be cut for a small additional charge. Please allow one week for cutting and shipping custom blocks, blocks larger than 18 x 24, and large orders.
UPS has additional shipping charges for large items. If you wish to know what the actual shipping charge will be, please add a note in the "Special Instructions" box in the shopping cart asking us to contact you with this information.
1/4" Shina Plywood
|Size||Price per block||Enter Quantity|
per sq. inch
Maximum width: 36"
Maximum length: 72"
There is a minimum charge of $1.00 each for custom cut blocks.
Allow one week for custom orders to be shipped.
NO RETURNS OR REFUNDS ON CUSTOM SIZES
The shipping estimate is not accurate. Contact us by phone or add a note in "Special Instructions" in the shopping cart if you need the shipping cost before we ship.
Please call our office to place special orders:
Or use the calculator in the right column:
You might also consider
|Bench Hooks||Quikwood||Ink Jet Transfer Paper|